Prime Line compilation

QQ-S

By Nicolas Lopez (opens new window)

G0 X110 Z5 F5000
G1 Z0.3
G3 I-110 J0 X0 Y110 E16 ; 1/4 circle wipe to prime the nozzle
G2 I0 J-110 X110 Y0 ; 1/4 circle wipe to prime the nozzle
G1 Z5

By Arno Zwaag (opens new window)

; FLSUN QQSP Custom Print Prime circle
G21 ; set units to millimeters
G90 ; Set all axes to absolute
G28 ; Go to origin on all axes
M82 ; Set E to Absolute Positioning
M117 Purging ; Update display
G00 X-1130 Y0 F3000
G0 E3 F200 ;Prepare 
G02 I300 F3000.0 E50
G03 I300 F3000.0 E50
M117 Purge completed ; Update display
G92 E0 ; Reset Extruder
G1 X0 Y0 Z20 F9000 ;Center the hotend, ready to print
G92 E0 ;zero the extruded length
M117 Printing ; Update display

The one in PrusaSlicer (opens new window)

; Prime line routine
M117 "Printing prime line"
G92 E0.0; reset extrusion distance
G1 X-54.672 Y-95.203 Z0.3 F4000; go outside print area
G92 E0.0; reset extrusion distance
G1 E2 F1000 ; de-retract and push ooze
G3 X38.904 Y-102.668 I54.672 J95.105 E20.999
G3 X54.671 Y-95.203 I-38.815 J102.373 E5.45800
G92 E0.0
G1 E-5 F3000 ; retract 5mm
G1 X52.931 Y-96.185 F1000 ; wipe
G1 X50.985 Y-97.231 F1000 ; wipe
G1 X49.018 Y-98.238 F1000 ; wipe
G1 X0 Y-109.798 F1000
G1 E4.8 F1500; de-retract
G92 E0.0 ; reset extrusion distance

Q5

The one in PrusaSlicer (opens new window)

G92 E0
G1 X-98 Y0 Z0.2 F4000 ; move to arc start
G3 X0 Y-98 I98 Z0.2 E40 F400 ; lay arc stripe 90deg
G0 Z1 
G92 E0.0